0800 FOR TAPE   |   0800 367 8273
100% NZ owned & operated
UHB Grey Foamed Acrylic Tape
larger imageMove mouse over the image to magnify
01583

UHB Grey Foamed Acrylic Tape

SUPERIOUR GREY ACRYLIC PERMANENT BONDING TAPE

UHB(copy)
Construction:

UHB graphic White3






Red PE Plastic Release Liner.
Modified Acrylic Coating
Grey Foamed Acrylic Substrate (Soft /Medium Density)
Modified Acrylic Coating
FEATURES:
  • Excellent UV, Moisture & Weather resistance.
  • Operating temperature resistance between - 30°C to + 120°C.
  • Good conformability & compressibility for uneven surfaces.
  • Excellent resistance to most solvents, chemicals & cleaning agents.
  • Absorbs dynamic stress loads & accommodates degrees of differential expansion between different substrates.
  • The 1918 is designed for high temperature operating for short periods at +232°C, if correct cleaning procedures are followed.
  • No corrosion or deformation.
 
COMMON SUBSTRATES:
  • Plastics
  • Glass
  • Metals & Powder coated products.
  • Laminates
  • Excellent on all High Surface Energy surfaces.
  • A primer is recommended on Low Surface Energy surfaces.
 
TYPICAL APPLICATIONS:
  • Excellent for bonding dissimilar materials such as laminates, metal & plastics.
  • Permanent joining of metals in textured surface applications.
  • Used for metal, plastic trim & panel mounting in the Automotive, Marine & Construction markets.
  • Mounting of architectural hardware – decorative trim, glazing bars & profiles.
  • Ideal for metal to metal bonding where grey colour is unobtrusive, also used on PVC extrusions.
  • Excellent for die cutting required shapes or profiles
 
  THE GREY UHB FAMILY:

Codes           Thickness
1908            0.6 mm
1910           1.1 mm
1918            1.1 mm (High temperature up to +232°C)
 
Roll Widths: Slit to customer required width sizes.
Surface Preparation: Refer to UHB Surface Preparation Guide.

 

Enquire

You might also be interested in ...

Orafol Adhesive tape systems
Oraflow-web-484
100% NZ OWNED & OPERATED
fern red
Proud to be:
100% NZ owned &
operated since 1998

MPI certified transitional facility
GS1 Net verified
badge12
All Tapespec Retail
barcodes are proudly
GS1 verified
Contact us
Phone. +64 9 272 9090    Fax. +64 9 272 9020    Email. enquiries@tapespec.co.nz     Postal.  Unit A 38 Highbrook Drive, East Tamaki, Auckland, New Zealand
tapespec bottom