UHB Grey Foamed Acrylic Tape

larger imageMove mouse over the image to magnify

SUPERIOR GREY ACRYLIC PERMANENT BONDING TAPE

Construction:

UHB graphic White3

Red PE Plastic Release Liner.
Modified Acrylic Coating
Grey Foamed Acrylic Substrate (Soft /Medium Density)
Modified Acrylic Coating

FEATURES:

Excellent UV, Moisture & Weather resistance.
Operating temperature resistance between - 30°C to + 120°C.
Good conformability & compressibility for uneven surfaces.
Excellent resistance to most solvents, chemicals & cleaning agents.
Absorbs dynamic stress loads & accommodates degrees of differential expansion between different substrates.
The 1918 is designed for high temperature operating for short periods at +232°C, if correct cleaning procedures are followed.
No corrosion or deformation.

COMMON SUBSTRATES:

Plastics
Glass
Metals & Powder coated products.
Laminates
Excellent on all High Surface Energy surfaces.
A primer is recommended on Low Surface Energy surfaces.

TYPICAL APPLICATIONS:

Excellent for bonding dissimilar materials such as laminates, metal & plastics.
Permanent joining of metals in textured surface applications.
Used for metal, plastic trim & panel mounting in the Automotive, Marine & Construction markets.
Mounting of architectural hardware – decorative trim, glazing bars & profiles.
Ideal for metal to metal bonding where grey colour is unobtrusive, also used on PVC extrusions.
Excellent for die cutting required shapes or profiles

THE GREY UHB FAMILY:

Codes           Thickness
1908            0.6 mm
1910           1 mm

Roll Widths: Slit to customer required width sizes.
Surface Preparation: Refer to UHB Surface Preparation Guide.